The totalizer output will produce a pulse output with every unit flow of the totalizer.
The totalizer pulse output can only be realized by mapping the pulse output to the OCT or
BUZZER hardware devices.
For example, assume that the POS totalizer pulse output is needed, and every pulse
should represent 0.1cubic meter of liquid flow; the pulse output will be mapped to the
internal Buzzer, so that with every 0.1 cubic meter of flow the BUZZER will beep for a while.
The following setups should be taken / performed:
Select the unit Cubic Meter under window M32.
Select the Multiplier as ‘2. X0.1’ under window M33.
Select the output option ‘9. POS INT Pulse’ under window M77. (INT stands for totalized )